Fiber Bragg grating sensor based on cantilever structure embedded in polymer 3D printed material
Fiber Bragg grating sensor based on cantilever structure embedded in polymer 3D printed material
| dc.contributor.author | Lima,R | en |
| dc.contributor.author | Tavares,R | en |
| dc.contributor.author | Susana Oliveira Silva | en |
| dc.contributor.author | Abreu,P | en |
| dc.contributor.author | Restivo,MT | en |
| dc.contributor.author | Orlando Frazão | en |
| dc.date.accessioned | 2018-01-23T12:23:17Z | |
| dc.date.available | 2018-01-23T12:23:17Z | |
| dc.date.issued | 2017 | en |
| dc.description.abstract | A cantilever structure in 3D printed based on a fiber Bragg grating (FBG) sensor embedded in polymer material is proposed. The FBG sensor was embedded in 3D printed coating and was tested under three physical parameters: displacement, temperature and vibration. The sensor was tested in displacement in two different regions of the cantilever, namely, on its midpoint and end point. The maximum displacement sensitivity achieved was (3 +/- 0.1) pm/mm for end point displacement, and a temperature sensitivity of (30 +/- 1) pm/degrees C was also attained. In the case of vibration measurements it was possible to obtain a 10.23Hz-low frequency oscillation. | en |
| dc.identifier.uri | http://repositorio.inesctec.pt/handle/123456789/7264 | |
| dc.identifier.uri | http://dx.doi.org/10.1117/12.2264600 | en |
| dc.language | eng | en |
| dc.relation | 4678 | en |
| dc.relation | 4061 | en |
| dc.rights | info:eu-repo/semantics/openAccess | en |
| dc.title | Fiber Bragg grating sensor based on cantilever structure embedded in polymer 3D printed material | en |
| dc.type | conferenceObject | en |
| dc.type | Publication | en |
Files
Original bundle
1 - 1 of 1